FAQ

Your flag should be slipped around the tube. For this purpose you can take the pole off the cylinder, manually but this is not recommended with poles higher than 6 meters. A tilt foot allows you to topple the pole at the basis to replace the flag. A mast with a hoistable gallows system is the simplest solution to replace your flag without effort.

A gallows system is the horizontal tube at the top of the pole. This makes sure that your flag is always visible, also on a windless day. At the bottom of the flag, attach a counterweight.

Your flag will always be finished with d-rings, which allows you to attach this onto the pole in a solid way. Should you choose for a gallows system, you flag must have a stitched tunnel.


We handle 2 print technics for the printing of flags. Digital print for small circulation and silk-screen print from 20 articles. Your design will also determine the print technic. Silk-screen print is only possible with flat colors without to many ranges of colors. With digital print, every design is possible.


The average life of a flag is 4 to 6 months. Depending on the region, location and weather, this term can be shorter or longer.


Official flags (like e.g. country flags) are available in 3 standard dimensions: H100 x W150 cm or H150 x W200 cm of H200 x W300 cm. Vertical advertising flags are available up to a width of 150 cm. The height varies from 3 to 5 meters according to the height of your pole. Of course, all the other dimensions can always be obtained on demand.


Every city or town has its own regulation on concreting the flag poles over. We advise you to go to the urbanism service of your city or town to inform whether or not it is necessary to apply for a permission.

Our professional placement service will come to place your flag pole(s) skillfully so you do not need to worry about this. Furthermore, we use quick-drying concrete, as a result of which we finish everything in one intervention and so your flags will flutter that same day!


We recommend to place the flag poles apart on at least 2x your flag width. Like this, your flags will not hook in each other or they will not tip the pole. This will benefit the life of your flags.

With your flag pole, you always need to choose the type of ground fixing. The ground fixing should always be placed in a solid concrete after which you can safely employ the pole on this.

The height of your flagpole depends for one thing on the location / implanting of the poles and for another thing on the flag format you desire. You can always count on our professional advice to determine the right solution for your location.

High frequency lengths are 6 - 8 - 10 - 12 meters high. Furthermore, we also produce your flagpole at the desired length. Also, bear in mind your type of ground fixing to determine the aboveground length of your pole.